Aeration kit EKUVA HP-60

Package contents:

1. ​Membrane air blower HIBLOW HP-60 (24 months warranty) - 1 pc.
2. Membrane tubular air diffuser JAGER TD 63/2050 (0.5 m long) - 1 pc.
3. Connector for hose connection to diffuser - 1 pc.
4. Rubber gasket to ensure connector tightness - 1 pc.
5. Stainless steel clamps AISI 16-25 mm. 2 pcs.
6. The set requires a 19 mm inner diameter hose. Hose is not included in the set price. Purchase the required hose length separately.
    

Technical specifications of the aeration set:

1. Air flow at 1 m depth - 69 l/min
2. Air flow at 1.5 m depth - 60 l/min
3. Air flow at 2 m depth - 50 l/min
4. Air flow at 2.5 m depth - 39 l/min
5. Recommended diffuser immersion depth - 2-2.5 m
6. Maximum diffuser immersion depth - 2.5 m
7. Maximum recommended hose length - 30 m
8. Air blower motor power - about 51 W (depending on operating pressure).
9. Noise level - 35 dB
10. Warranty for air blower 24 months.
     

Installation and commissioning of the aeration set:

1. First, select a location for the air blower. We recommend placing the air blower as close to the water body as possible. This will avoid greater air flow losses. The air blower can operate outdoors, but it must be protected from direct precipitation and severe frost. Install the air blower in a sealed box (metal, plastic, or wooden). The box does not need to be insulated, but it must have openings to allow air to enter. If there is a gazebo, sauna, or other structure near the water body, install the air blower there. In both cases, ensure a safe and reliable power supply for the air blower.
2. Hose. Use a 19 mm inner diameter pressure hose purchased from us or your own (do not use a watering hose). We recommend using a hose no longer than 30 m. Attach one end of the hose to the air blower outlet nozzle and tighten it securely with the supplied clamp. Take the air diffuser and screw the supplied nozzle onto the hose. To ensure tightness, use the supplied rubber gasket. Attach the other end of the hose to this connector and tighten it with a clamp.
3. Immersion of the air diffuser. We recommend immersing the diffuser as deep as possible (but do not exceed the maximum allowable immersion depth). The higher the water column above the diffuser, the better the air bubbles and the oxygen contained in them dissolve in the water, causing mixing of various water layers. The JAGER air diffuser is lighter than water. Tie synthetic ropes to both ends of the diffuser and attach weights to the ends of the ropes (recommended weight 0.5 -1 kg). Other methods of immersing the diffuser can be found, but this is the simplest and works perfectly. The recommended length of the ropes between the weights and the diffuser is 20-30 cm. Immerse the prepared diffuser with weights into your chosen location in the water body. The weights will settle on the bottom of the body, and the diffuser will rise as much as the length of the ropes allows. In this way, the diffuser will not cause bottom sediment disturbance and will not cloud your water body while operating.
4. Connect the air blower to the power supply and the aeration system will start working. If there is no need to aerate around the clock, purchase a timer and set the desired operating mode. The aeration system is designed to operate both continuously and intermittently. Enjoy using it.

More data about the air blower:

More data about the air diffuser: