Aeration kit EKUVA S-50

Purpose:

For aeration of water bodies in winter and summer. In winter, aeration protects the water body from freezing over and fish from suffocation; in summer, it improves the mineralization processes of the water body, clarifies the water, and improves water quality.

Set includes:

1. ​SECOH JDK-50 membrane air blower (24-month warranty) - 1 pc.
2. JAGER TD 63/2050 membrane tubular air diffuser - 1 pc.
3. Connector for attaching the hose to the diffuser - 1 pc.
4. Rubber gasket to ensure the tightness of the connection - 1 pc.
5. AISI stainless steel clamps 16-25 mm. 2 pcs.
6. The set requires a hose with an internal diameter of 19 mm.  The hose is not included in the price of the set. Purchase the required hose length separately.

Technical features:

1. Air flow at a depth of 1 m - 59 l/min
2. Air flow at a depth of 1.5 m - 50 l/min
3. Air flow at a depth of 2 m - 40 l/miny
4. Recommended diffuser submersion depth - 2 m
5. Maximum diffuser submersion depth - 2 m
6. Maximum recommended hose length - 20 m
7. Air blower motor power - 42 W
8. Noise level - 36 dB
9. 24-month warranty for the air blower.

Installation and start-up of the aeration set:

1. First, you need to choose a location for the air blower. We recommend placing the air blower as close to the water body as possible. This will help avoid greater air flow losses. The air blower can operate outdoors, but it must be protected from direct precipitation and severe frost. Install the air blower in a sealed box (metal, plastic, or wooden). The box does not need to be insulated, but it is necessary to leave openings for air to enter inside. If there is a gazebo, sauna, or other structure near the water body, install the air blower there. In both cases, ensure a safe and reliable power supply for the air blower.
2. Hose. Use a pressure hose with an internal diameter of 19 mm purchased from us or one you already have (do not use a watering hose). We recommend using a hose no longer than 20 m. Fit one end of the hose onto the air blower outlet nozzle and carefully tighten it with the supplied clamp. Take the air diffuser and screw on the supplied hose connector. To ensure tightness, use the supplied rubber gasket. Fit the other end of the hose onto this connector and tighten it with the clamp.
3. Submerging the air diffuser. We recommend submerging the diffuser as deep as possible (just do not exceed the maximum permitted submersion depth). The higher the water column above the diffuser, the better the air bubbles and the oxygen in them dissolve in the water, and the mixing of different water layers occurs. The JAGER air diffuser is lighter than water. To submerge it, tie synthetic ropes to both ends of the diffuser and weights to the ends of the ropes (recommended weight 0.5-1 kg). Other methods of submerging the diffuser can also be found, but this one is the simplest and works perfectly. The recommended rope length between the weights and the diffuser is 20-30 cm. Submerge the prepared diffuser with the weights into the chosen location of your water body. The weights will settle on the bottom of the water body, and the diffuser will rise as much as the left rope length allows. This way, the diffuser will not stir up bottom sediments during operation and will not make your water body cloudy.
4. Plug the air blower into the power supply and the aeration system will start operating. If there is no need for aeration around the clock, purchase a timer and set the operating mode you need. The aeration system is designed to operate in both continuous and intermittent mode. Enjoy using it.

More data about the air blower:

More data about the  air diffuser: