Aeration kit EKUVA S-60

Purpose:

For aeration of water bodies in winter and summer. In winter, aeration protects the water body from freezing over and fish from suffocating; in summer, it improves the mineralization processes of the water body, clarifies it, and improves water quality.

Set includes:

1. ​SECOH JDK-S-60 membrane air blower (24-month warranty) - 1 pc.
2. JAGER TD 63/2050 membrane tubular air diffuser (0.5 m length) - 1 pc.
3. Connector for attaching the hose to the diffuser - 1 pc.
4. Rubber gasket to ensure the connector is airtight - 1 pc.
5. AISI 16-25 mm stainless steel clamps. 2 pcs.
6. The set requires a hose with an internal diameter of 19 mm.  The hose is not included in the price of the set. Purchase the required hose length separately.
    

Technical specifications of the aeration set:

1. Air flow at 1 m depth - 105 l/min
2. Air flow at 1.5 m depth - 85 l/min
3. Air flow at 2 m depth - 60 l/min
4. Air flow at 2.5 m depth - 30 l/min
5. Recommended diffuser submersion depth - 2-2.5 m
6. Maximum diffuser submersion depth - 2.5 m
7. Maximum recommended hose length - 30 m
8. Blower motor power - 40W
9. Noise level - 41 dB
10. Blower warranty 24 months.
     

Installation and startup of the aeration set:

1. First, you need to choose a location for the blower. We recommend placing the blower as close to the water body as possible. This will help avoid greater air flow losses. The blower can operate outdoors, but it must be protected from direct precipitation and severe frost. Install the blower in a sealed box (metal, plastic, or wooden). The box does not need to be insulated, but openings must be left for air to enter inside. If there is a gazebo, sauna hut, or another structure near the water body, install the blower there. In either case, ensure a safe and reliable power supply for the blower.
2. Hose. Use a pressure hose with an internal diameter of 19 mm purchased from us or one you already have (do not use a watering hose). We recommend using a hose no longer than 30 m. Put one end of the hose onto the blower outlet nozzle and tighten it carefully with the supplied clamp. Take the air diffuser and screw on the supplied hose fitting. To ensure tightness, use the supplied rubber gasket. Put the other end of the hose onto this connector and tighten it with the clamp.
3. Submerging the air diffuser. We recommend submerging the diffuser as deep as possible (just do not exceed the maximum permitted submersion depth). The higher the water column above the diffuser, the better the air bubbles and the oxygen in them dissolve in the water, and the mixing of different water layers occurs. The JAGER air diffuser is lighter than water. To submerge it, tie synthetic ropes to both ends of the diffuser and attach weights to the ends of the ropes (recommended weight 0.5-1 kg). Other methods of submerging the diffuser can also be found, but this one is the simplest and works perfectly. The recommended rope length between the weights and the diffuser is 20-30 cm. Submerge the prepared diffuser with weights in the chosen place in your water body. The weights will lie on the bottom of the water body, while the diffuser will rise as much as the remaining rope length allows. This way, when operating, the diffuser will not stir up bottom sediments or make your water body cloudy.
4. Plug the blower into the power supply and the aeration system will start operating. If there is no need to aerate around the clock, purchase a timer and set the operating mode you need. The aeration system is designed to operate in both continuous and intermittent mode. Enjoy using it.

More data about the blower:

More data about the air diffuser: