Purpose:
For aeration of water bodies in winter and summer. In winter, aeration protects the water body from freezing and fish suffocation; in summer, it improves the mineralization processes of the water body, clarifies and improves water quality.
Set includes:
- Membrane blower SECOH JDK-S-60 (24 months warranty) - 1 pc.
- Membrane tubular air diffuser JAGER TD 63/2050 (0.5 m long) - 1 pc.
- Connector for hose attachment to diffuser - 1 pc.
- Rubber gasket to ensure connector tightness - 1 pc.
- Stainless steel clamps AISI 16-25 mm. 2 pcs.
- The set requires a 19 mm inner diameter hose. Hose is not included in the set price. Purchase the required hose length separately.
Technical specifications of the aeration set:
- Air flow at 1 m depth - 105 l/min
- Air flow at 1.5 m depth - 85 l/min
- Air flow at 2 m depth - 60 l/min
- Air flow at 2.5 m depth - 30 l/min
- Recommended diffuser immersion depth - 2-2.5 m
- Maximum diffuser immersion depth - 2.5 m
- Maximum recommended hose length - 30 m
- Blower motor power - 40W
- Noise level - 41 dB
- Warranty for blower 24 months.
Installation and commissioning of the aeration set:
- First, select a location for the blower. We recommend placing the blower as close to the water body as possible. This will avoid greater air flow losses. The blower can operate outdoors, but it must be protected from direct precipitation and severe cold. Install the blower in a sealed box (metal, plastic, or wooden). The box does not need to be insulated, but it must have openings for air to enter. If there is a gazebo, sauna, or other structure near the water body, install the blower there. In both cases, ensure safe and reliable power supply to the blower.
- Hose. Use a 19 mm inner diameter pressure hose purchased from us or your own (do not use a watering hose). We recommend using a hose no longer than 30 m. Attach one end of the hose to the blower outlet nozzle and tighten it securely with the supplied clamp. Take the air diffuser and screw the supplied nozzle onto the hose. To ensure tightness, use the supplied rubber gasket. Attach the other end of the hose to this connector and tighten it with a clamp.
- Immersion of the air diffuser. We recommend immersing the diffuser as deep as possible (do not exceed the maximum allowable immersion depth). The higher the water column above the diffuser, the better the air bubbles and the oxygen in them dissolve in the water, causing mixing of various water layers. The JAGER air diffuser is lighter than water. Tie synthetic ropes to both ends of the diffuser and attach weights to the rope ends (recommended weight 0.5 - 1 kg). Other methods of diffuser immersion can be found, but this is the simplest and works well. Recommended rope length between weights and diffuser is 20-30 cm. Immerse the prepared diffuser with weights into your chosen location in the water body. The weights will rest on the bottom, and the diffuser will rise as much as the rope length allows. This way, the diffuser will not stir up bottom sediments or cloud your water body while operating.
- Connect the blower to the power supply and the aeration system will start working. If there is no need to aerate around the clock, purchase a timer and set the desired operating mode. The aeration system is designed to operate both continuously and intermittently. Enjoy using it.
More data about the blower:
| SECOH Model |
|
|
JDK-S-60 |
| Blower performance |
l/min |
0 mbar |
130 |
| 50 mbar |
125 |
| 100 mbar |
105 |
| 150 mbar |
85 |
| 200 mbar |
60 |
| 250 mbar |
30 |
| Maximum pressure |
mbar |
|
250 |
| Voltage/Frequency |
V/Hz |
|
230/50 |
| Motor power |
W |
200 mbar |
40 |
| Noise level |
dB(A) |
|
41 |
| Dimensions |
mm |
WxDxH |
214x185x211 |
| Connection |
mm |
Ø outer |
19 |
| Weight |
Kg |
|
8.5 |
| Auto brakes |
|
|
Present |
| Housing |
|
|
Aluminum |
| Protection class |
IP |
|
44 |
| Manufacturer |
|
|
Secoh Sangyo Ltd, Japan |
| Country of origin |
|
|
China |
| Warranty |
|
|
24 months |
More data about the air diffuser:
| Model |
TD 63/2050 |
| Membrane material (rubber) |
EPDM |
| Total diffuser length, mm |
560 |
| Perforated length, mm |
500 |
| Perforated area m2 |
0.09 |
| Diameter, mm |
63 |
| Air flow rate, m3/h |
1-6 |
| Air flow rate, l/min |
16-100 |
| Maximum air flow rate, m3/h |
10 |
| Maximum air flow rate, l/min |
167 |
| Connection (internal thread), inches |
3/4 |
| Weight, kg |
0.8 |
| Manufacturer |
Jäger Umwelt-Technik GmbH, Germany |
| Country of origin |
Germany
|