Aeration set EKUVA S-80

Purpose:

For aeration of water bodies in winter and summer. In winter, aeration protects the water body from freezing and fish suffocation; in summer, it improves the mineralization processes of the water body, clarifies and enhances water quality.

Set includes:

1. ​Membrane air blower SECOH JDK-S-80 (24 months warranty) - 1 pc.
2. Membrane tubular air diffuser JAGER TD 63/2100 (1 m long, Germany) - 1 pc.
3. Connector for hose attachment to diffuser - 1 pc.
4. Rubber gasket to ensure connector tightness - 1 pc.
5. Stainless steel clamps AISI 16-25 mm. 2 pcs.
6. The set requires a 19 mm inner diameter hose. Hose is not included in the set price. Purchase the required hose length separately.
    

Technical specifications of the aeration set:

1. Air flow at 1 m depth - 115 l/min
2. Air flow at 1.5 m depth - 90 l/min
3. Air flow at 2 m depth - 75 l/min
4. Air flow at 2.5 m depth - 50 l/min
5. Recommended diffuser immersion depth - 2-2.5 m
6. Maximum diffuser immersion depth - 2.5 m
7. Maximum recommended hose length - 30 m
8. Air blower motor power - 50W
9. Noise level - 43 dB
10. Warranty for air blower 24 months.
     

Installation and commissioning of the aeration set:

1. First, select a location for the air blower. We recommend placing the air blower as close to the water body as possible. This will avoid greater air flow losses. The air blower can operate outdoors but must be protected from direct precipitation and severe cold. Install the air blower in a sealed box (metal, plastic, or wooden). The box does not need insulation but must have openings for air intake. If there is a gazebo, sauna, or other structure near the water body, install the air blower there. In both cases, ensure safe and reliable power supply to the air blower.
2. Hose. Use a 19 mm inner diameter pressure hose purchased from us or your own (do not use a watering hose). We recommend using a hose no longer than 30 m. Attach one end of the hose to the air blower outlet nozzle and tighten it securely with the included clamp. Take the air diffuser and screw the included nozzle onto the hose. To ensure tightness, use the included rubber gasket. Attach the other end of the hose to this connector and tighten it with a clamp.
3. Immersion of the air diffuser. We recommend immersing the diffuser as deep as possible (do not exceed the maximum allowed immersion depth). The higher the water column above the diffuser, the better the air bubbles and the oxygen in them dissolve in the water, causing mixing of various water layers. The JAGER air diffuser is lighter than water. Tie synthetic ropes to both ends of the diffuser and attach weights to the rope ends (recommended weight 0.5 - 1 kg). Other immersion methods can be found, but this is the simplest and works well. Recommended rope length between weights and diffuser is 20-30 cm. Immerse the prepared diffuser with weights into your chosen location in the water body. The weights will settle on the bottom, and the diffuser will rise as much as the rope length allows. This way, the diffuser will not stir up bottom sediments or cloud your water body while operating.
4. Connect the air blower to the power supply and the aeration system will start working. If there is no need to aerate 24/7, purchase a timer and set the desired operating mode. The aeration system is designed to operate both continuously and intermittently. Enjoy using it.

More data about the air blower:

More data about the air diffuser: