Aeration set EKUVA V-60

Package:

1. ​Membrane blower HAILEA V-60 (24 month warranty) - 1 pc.

2. Membrane tubular air diffuser JAGER TD 63/2050 - 1 pc.

3. Connector for connecting the hose to the diffuser - 1 pc.

4. Rubber gasket to ensure the tightness of the connection - 1 pc.

5. Stainless steel clamps AISI 16-25 mm. 2 pcs.

6. The kit requires a 19 mm inner diameter hose. The hose is not included in the kit price. Please purchase the required length of hose separately.

Technical characteristics:

1. Air flow at a depth of 1 m - 34 l/min

2. Air flow at a depth of 1.5 m - 25 l/min

3. Air flow at a depth of 2 m - 16 l/min

4. Recommended immersion depth of the diffuser - 1.5 m

5. Maximum immersion depth of the diffuser - 2 m

6. Maximum recommended hose length - 30 m

7. Blower motor power - 35 W

8. Noise level - 45 dB

9. Warranty for the blower is 24 months.

Installation and commissioning of the aeration kit:

1. First, you need to choose a location for the blower. We recommend placing the blower as close to the water body as possible. This will avoid major air flow losses. The blower can work outdoors, but it must be protected from direct precipitation and severe frost. Install the blower in a sealed box (metal, plastic, wooden). The box does not need to be insulated, but it is necessary to leave openings for air to enter it. If there is a gazebo, sauna or other structure near the water body, install the blower in them. In both cases, ensure a safe and reliable power supply for the blower.

2. Hose. Use a 19 mm internal diameter pressure hose purchased from us or your own (do not use a watering hose). We recommend using a hose no longer than 30 m. Place one end of the hose on the blower outlet nozzle and tighten it carefully with the supplied clamp. Take the air diffuser and screw the supplied nozzle onto the hose. Use the supplied rubber gasket to ensure a tight seal. Place the other end of the hose on this connection and tighten it with the clamp.

3. Submerging the air diffuser. We recommend submerging the diffuser as deep as possible (just do not exceed the maximum allowable immersion depth). The higher the water column above the diffuser, the better the air bubbles and the oxygen they contain dissolve in the water, and the mixing of various water layers occurs. The JAGER air diffuser is lighter than water. To submerge it, tie synthetic ropes to both ends of the diffuser and weights to their ends (recommended weight 0.5 -1 kg). You can also find other ways to submerge the diffuser, but this is the simplest and works perfectly. The recommended length of the ropes between the weights and the diffuser is 20-30 cm. Submerge the prepared diffuser with weights in the place of your chosen body of water. The weights will lie on the bottom of the body of water, and the diffuser will rise as much as the length of the ropes allows. In this way, the diffuser will not cause sediment on the bottom and will not muddy your body of water.

4. Plug the blower into the power supply and the aeration system will start working. If there is no need to aerate around the clock - purchase a timer and set the operating mode you need. The aeration system is designed to work in both constant and intermittent modes. Enjoy using it.

More information about the HAILEA V-60 blower

More details about the air diffuser: